全模颤振风洞试验三索悬挂系统多体动力学分析

全模颤振风洞试验需要通过软支撑系统模拟飞行器的自由飞行状态并调整模型姿态达到配平状态。参考NASA双索悬挂方案，提出了一种两电机驱动的三索悬挂系统，利用后方两索的同向/反向联动实现模型俯仰和滚转姿态的调整，利用弹簧刚度以及钢绳张力设计实现支撑频率要求。基于柔性多体动力学方法，建立了包括飞行器刚体模型、柔性索、滑轮、弹簧、气动力模型、伺服电机控制在内的复杂系统动力学模型，其中，利用任意拉格朗日-欧拉（ALE）变长度索单元描述钢绳，利用不约束物质坐标的索结点约束描述钢绳与滑轮相互作用，利用索结点物质输运速度约束描述伺服电机绞盘，利用飞行力学的气动力模型描述吹风下的气动力。基于该模型，通过小扰动响应辨识研究了弹簧刚度、钢绳张力、连接点位置等因素对支撑频率的影响规律，并分析了系统姿态调整能力，俯仰调整范围达到-12.5°~12.5°，滚转调整范围达到-45°~45°。采用滑轮处电位计测量的钢绳相对位移作为反馈信号，基于设计的控制律利用多体动力学求解器与Simulink对风洞吹风下的姿态调整过程进行仿真，模型达到配平状态，获得了吹风下的索拉力和伺服电机功率，为系统设计提供基础。     

地球同步轨道薄膜太阳帆的姿态轨道控制方法

薄膜太阳帆（FSS）是集推进、发电和姿轨控功能于一体化的超大型挠性太阳帆式航天器，通过调整薄膜反射率产生可变推力和力矩，实现其姿态和轨道运动控制。结合薄膜太阳帆在地球同步轨道运行时的受力特性进行了轨道漂移分析。通过建立薄膜太阳帆动力学模型及受力模型，提出了调整帆面角度轨道修正方法以及基于薄膜光压力矩角动量卸载的长期在轨对日定向面内双轴动量轮稳定控制方法。通过系统仿真验证表明所提的轨道修正和对日定向控制方法是合理有效的，可使薄膜太阳帆长期在定点位置维持对日定向。     

A survey of safety separation management and collision avoidance approaches of civil UAS operating in integration national airspace system

Recent years have witnessed a booming of the industry of civil Unmanned Aircraft System (UAS). As an emerging industry, the UAS industry has been attracting great attention from governments of all countries and the aviation industry. UAS are highly digitalized, informationized, and intelligent; therefore, their integration into the national airspace system has become an important trend in the development of civil aviation. However, the complexity of UAS operation poses great challenges to the traditional aviation regulatory system and technical means. How to prevent collisions between UASs and between UAS and manned aircraft to achieve safe and efficient operation in the integrated operating airspace has become a common challenge for industry and academia around the world. In recent years, the international community has carried out a great amount of work and experiments in the air traffic management of UAS and some of the key technologies. This paper attempts to make a review of the UAS separation management and key technologies in collision avoidance in the integrated airspace, mainly focusing on the current situation of UAS Traffic Management (UTM), safety separation standards, detection system, collision risk prediction, collision avoidance, safety risk assessment, etc., as well as an analysis of the bottlenecks that the current researches encountered and their development trends, so as to provide some insights and references for further research in this regard. Finally, this paper makes a further summary of some of the research highlights and challenges.     

内装式空射运载火箭重力出舱机箭耦合动力学分析

研究了以运输机为平台的内装式运载火箭空射过程载机和火箭的耦合动力学建模。建模针对两个阶段：第一阶段，火箭固定于载机机舱内，两者构成一个整体，按照普通刚体的力学方法处理；第二阶段，火箭解锁后，沿着舱内的发射筒向外滑行，载机和火箭形成两刚体相互作用的耦合系统，基于牛顿-欧拉法建立系统动力学模型。载机在空射火箭过程中，油门和升降舵满偏，在加速前飞的同时拉大姿态俯仰角，火箭在自身重力分量和惯性力的作用下，沿着机舱内的发射筒加速向外滑行，直至与载机分离。数值仿真分析了空射过程载机的重要力学参数的变化过程，验证了载机操控策略的可行性和安全性，可为未来中国空射运载火箭技术设计提供数据参考。     

某飞行器推力矢量试验测力装置研制

为满足某飞行器推力矢量试验的测试要求,采用两台六分量应变天平和一个空气桥组成测力装置来实现飞机全机气动力和喷管推进特性同时分别测量。基于有限元软件,对天平的应变及空气桥对天平的干扰进行了分析。结果表明:空气桥对天平力分量的干扰值优于5%,对力矩(滚转力矩除外)分量的干扰值优于15%,达到了设计指标。通过校准获得了单独天平、天平带空气桥(充压、不充压)状态下的校准公式,校准结果表明:两台天平各分量的综合加载误差均优于0.3%,天平带空气桥(充压、不充压)状态下各分量的综合加载误差优于0.5%,空气桥对天平的干扰量值与有限元分析结果一致。理论分析与实测结果证明:研制的天平及空气桥达到了预定目标,它的测量精准度高,满足推力矢量风洞试验需求。     

Experimental study on plasma jet deflection and energy extraction with MHD control

This paper presents an integrated research scheme for vector deflection and energy extraction in a gas plasma jet under Magneto-Hydrodynamic (MHD) control. A MHD-controlled thrust-vector test rig was used to conduct the experimental research. A gas plasma was obtained by injecting ionization seeds of Cs₂CO₃ into the combustion chamber via artificially forced ionization. The effects of the gas temperature and ionization seed mass fraction on the plasma jet deflection and energy extraction were experimentally verified under an applied magnetic field. The experimental results were analyzed theoretically. The results showed that the deflection amplitude of the gas plasma jet and the extracted voltage signal intensity increased with increasing gas temperature and the ionization seed mass fraction. The extracted dynamic voltage signals proved that the ionization seeds of Cs₂CO₃ induced gas ionization at 1173 K. The experiment verified that it is feasible to simultaneously achieve jet deflection and extract energy under the action of an external magnetic field.     

考虑探测构形的多飞行器协同探测与制导一体化设计

针对多飞行器协同拦截机动目标时几何构形会影响协同探测和制导效果的问题，基于最优控制理论提出一种考虑探测构形的协同探测与制导一体化设计方法。基于飞行器相对运动学、动力学方程和双视线协同探测原理，建立了协同拦截模型。在制导设计中引入视线分离角参量以调制协同探测几何构形、减小相对距离探测误差，从而在制导全程增强协同探测效果。将相对距离协同探测结果应用到剩余时间和制导律解算中，基于最优控制理论实现协同探测与制导环节一体化设计。仿真结果表明：在目标进行不同程度机动的情况下，与修正比例导引律相比，所提方法在协同探测和制导方面均具有明显优势。     

利用微波探测仪(ATMS)对在轨微波辐射计观测精度的模拟分析

微波辐射计的观测精度及其对数值模式同化应用的影响评估是微波辐射计观测指标设计的重要参考。基于微波探测仪(ATMS)资料,利用三维变分同化系统模拟分析在轨微波辐射计的观测精度指标。针对ATMS观测误差特征,在其观测基础上增加均值为零、标准偏差分别为0.5,1.0,1.5,2.0K的正态随机扰动,进而获得不同精度的观测模拟值序列,然后利用Harris和Kelley的辐射资料偏差订正经验方法订正不同精度的观测资料。偏差订正后,利用三维变分同化模式(WRFDA)直接同化ATMS资料。通过2016年6月6h预报场的同化试验,评估了不同观测精度的模拟资料对数值模式的同化影响。     

Fault mode probability factor based fault-tolerant control for dissimilar redundant actuation system

This paper presents a Fault Mode Probability Factor (FMPF) based Fault-Tolerant Control (FTC) strategy for multiple faults of Dissimilar Redundant Actuation System (DRAS) composed of Hydraulic Actuator (HA) and Electro-Hydrostatic Actuator (EHA). The long-term service and severe working conditions can result in multiple gradual faults which can ultimately degrade the system performance, resulting in the system model drift into the fault state characterized with parameter uncertainty. The paper proposes to address this problem by using the historical statistics of the multiple gradual faults and the proposed FMPF to amend the system model with parameter uncertainty. To balance the system model precision and computation time, a Moving Window (MW) method is used to determine the applied historical statistics. The FMPF based FTC strategy is developed for the amended system model where the system estimation and Linear Quadratic Regulator (LQR) are updated at the end of system sampling period. The simulations of DRAS system subjected to multiple faults have been performed and the results indicate the effectiveness of the proposed approach.     

A multi-aircraft conflict detection and resolution method for 4-dimensional trajectory-based operation

Conflict Detection and Resolution(CDR) is the key to ensure aviation safety based on Trajectory Prediction(TP). Uncertainties that affect aircraft motions cause difficulty in an accurate prediction of the trajectory, especially in the context of four-dimensional(4D) Trajectory-Based Operation(4DTBO), which brings the uncertainty of pilot intent. This study draws on the idea of time geography, and turns the research focus of CDR from TP to an analysis of the aircraft reachable space constrained by 4D waypoint constraints. The concepts of space–time reachability of aircraft and space–time potential conflict space are proposed. A novel pre-CDR scheme for multiple aircraft is established. A key advantage of the scheme is that the uncertainty of pilot intent is accounted for via a Space-Time Prism(STP) for aircraft. Conflict detection is performed by verifying whether the STPs of aircraft intersect or not, and conflict resolution is performed by planning a conflict-free space–time trajectory avoiding intersection. Numerical examples are presented to validate the efficiency of the proposed scheme.